The Scan Profiles; Description Of The Scan Job - Oce VarioPrint 4110 User Manual

Description of the scan job settings
Name of the
setting
'Align'
'Margin
erase'
'Exposure'
'Job' settings
#
Name of the
setting
'File name:
{0}'
152 Chapter 4 - Work with the operator panel
Values Description
'Top left' An image on a sheet may be smaller than the media
size of the file, for example because you scaled the
image to 70% of its original size. The 'Align' setting
allows you to indicate the position of the image on
the sheet. 'Top left' moves the image to the upper left
corner of the sheet.
'Centre' 'Centre' moves the image to the centre of the sheet.
'Top right' 'Top right' moves the image to the upper right corner
of the sheet.
Margins of a document sometimes contain notes or
punch holes, for example. The machine allows you to
hide these elements on the copy. With the + and -
buttons of the 'Margin erase' setting you can define
how much margin of the original you want to erase.
You can enter a value up to 100 mm / 3.94 inches.
'Dark' You can adjust the settings for light areas and dark
areas on the print separately.
When an area on the output is dark grey but must be
black, then select a value of 1 to 3.
When the area must be lighter, then select a value of
-1 to -3.
'Light' When an area on the output is light grey but must be
white, then select a value of 1 to 3.
When the area must be darker, then select a value of
-1 to -3.
Values Description
Fixed The system generates a file name for your scan job.
You cannot change this name. However, you can de-
fine the structure of the file name in the scan profiles
file on the Controller (see
page 141).
'The scan profiles file' on