Table of Contents
Advertisement
'Job' settings
#
Name of the
setting
'Job name'
'Number of
sets'
'Check first
set'
'Destination'
'Account ID'
Values
Description
By default, all copy jobs are named 'Copy job' with a
sequence number. To identify your copy job more
easily in the list of waiting jobs or scheduled jobs, you
can change the name of the copy job. When you press
the 'Job name' button a keyboard appears.
Use this setting to define the number of copies. You
can enter a value from 1 - 65,000. The default value
is 1.
'On'
The machine stops the print job after the first set.
Now you can check if the first set is OK. When the
first set is OK you can resume the print job.
'Off'
The machine prints the whole job. The machine does
not stop after the first set.
'Scheduled
Add the copy job to the list of 'Scheduled jobs' in the
jobs'
'Jobs' view.
'Waiting
Add the copy job to the list or 'Waiting jobs' in the
jobs'
'Jobs' view.
Enter the account ID for the current job. The account
ID function is only available when the accounting
function on the controller is enabled.
Description of the copy job settings
Note:
This setting is only available when in the
workflow profile Check first set is set to
'<html>As in job</html>'.
Chapter 4 - Work with the operator panel
117
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
