Change The Type Of Offset - Oce VarioPrint 4110 User Manual

Illustration
[54] Change the type of offset stacking
Change the type of offset stacking
On the operator panel, press the 'Jobs' button.
1.
In the list of 'Waiting jobs' or 'Scheduled jobs', press the job you want to edit.
2.
Press 'Properties'.
3.
Note:
You can also press the job 2 times to access the 'Properties' window. This function is
comparable to double-clicking with a mouse.
Press the 'Offset stacking' button.
4.
The two types of offset stacking appear.
Press the desired type of offset stacking.
5.
The 'Offset stacking' button displays the selected type of offset stacking.
Change the type of offset stacking
Chapter 4 - Work with the operator panel 93