Combine Subsets Into One File - Oce VarioPrint 4110 User Manual

Combine subsets into one file

Introduction
You can use the scan function of the machine to carry out all kinds of scan jobs. You can
carry out scan-to-file or scan-to-email jobs, for example. When the document contains
non-standard size media or when you want to combine various documents, you can create
a combined scan job. All the different originals are then combined in 1 file. This is com-
parable to combining several documents in a copy job (see
ment ' on page
You want to scan a document that consists of several parts - called subsets - that differ
from each other and require individual settings
You want to combine different documents into one file
Different subsets are subsets that have a mix of 1-sided and 2-sided pages, or require dif-
ferent exposure settings, for example. When you scan these types of documents, you must
define the settings for each subset individually.
This section describes the following.
Combine subsets into one file.
Furthermore, this sections describes the actions you can carry out from the preview
pane.
Add a subset
Insert a subset
Delete a subset
Edit a subset.
Before you begin
Divide your document into subsets.
1.
Put the first subset into the automatic document feeder or on the glass plate.
2.
Note:
When you use the automatic document feeder, the size of the originals must be one of
the supported standard sizes.
If necessary, adjust the original guides of the automatic document feeder.
3.
120). The following situations can occur, for example.
Combine subsets into one file
'Combine subsets into one docu-
Chapter 4 - Work with the operator panel 161