Introduction To The Media Handling; Section...........................................199 Handling - Oce VarioPrint 4110 User Manual

Introduction to the media handling

Introduction
The machine supports a wide range of media, including tabs and inserts. The supported
media sizes range from 203 mm x 203 mm (minimum) to 305 mm x 457 mm (maximum).
The supported media weights range from 50 - 300 g/m² for media that are recommended
by the manufacturer, and 60 - 200 g/m² for other media.
This section describes the following.
Media handling in general
The 'Media catalogue'
Temporary media.
Note:
You can place all the supported media in any paper tray.
General introduction to the media handling
All the print jobs require media that you can assign to the paper trays via the operator
panel. The print jobs can require media that are included in the 'Media catalogue'.
However, the print jobs can also require media that are not included in the 'Media cata-
logue'. These media become temporary media on the system.
What is the 'Media catalogue'
The 'Media catalogue' is a list of predefined media and media attributes which you can
define in the Settings Editor application on the controller. The use of the 'Media catalogue'
is only recommended, not compulsory.
When you use the 'Media catalogue', the operator panel, the printer drivers and other
applications all display the same list of predefined media. The operator panel and the
printer driver automatically retrieve and show the latest version of the 'Media catalogue'.
What are temporary media
You can also use many other media that are not included in the 'Media catalogue'. These
media become temporary media. You can look up the currently used temporary media
in the 'Media' section of the 'System' view. Furthermore, you can assign the temporary
media to a paper tray.
The temporary media remain available on the system until:
Introduction to the media handling
Chapter 4 - Work with the operator panel 201