Scan from the automatic document feeder using the zoom function
Illustration
Scan from the glass plate and use the zoom function
The following table shows the zoom behaviour of the machine when the originals are
scanned from the glass plate. The focus is on the upper right-hand corner of the original
(upper left-hand corner of the glass plate).
Scan from the glass plate using the zoom function
Illustration
Description
The original is placed face down and in readable form into
the automatic document feeder.
The centre of the original is a fixed point and is used as the
origin of the image.
Result of a scan with a 100% zoom factor.
Result of a scan with a 50% zoom factor.
Note:
The centre of the image is fixed.
Result of a scan with a 200% zoom factor.
Note:
The centre of the image is fixed.
#
Description
The original is placed face down and in readable form in
the upper left-hand corner on the glass plate.
The upper left-hand corner of the glass plate is a fixed point
and is used as the origin of the image.
Chapter 4 - Work with the operator panel
The zoom behaviour
#
107