Nbrstatsclear - Brocade Communications Systems Brocade 8/12c Command Reference Manual

nbrStatsClear

Resets FSPF interface counters.
SYNOPSIS
nbrstatsclear [slot/][port]
DESCRIPTION
Use this command to reset the counters of fabric shortest path first (FSPF) frames transmitted and
received on all interswitch links (ISLs) or on a specified ISL Use this command without operands to reset
counters on all interfaces. Use interfaceShow to view the FSPF counters.
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
This command has the following operands:
slot
port
EXAMPLES
To display the counters on a port:
To reset the counters on a port:
Fabric OS Command Reference
53-1001764-01
For bladed systems only, specify the slot number of the port to display, followed by
a slash (/).
Specify the port number to display, relative to its slot for bladed systems. Use
switchShow to list valid ports. This operand is optional; if omitted, FSPF statistics
are reset.
switch:admin> interfaceshow 1/0
idbP = 0x10050a38
Interface 0 data structure:
nghbP = 0x1004ce68
ifNo = 0
masterPort = 0 (self)
defaultCost = 500
cost = 500
delay = 1
(output truncated)
nCmdAcc = 37
nInvCmd = 0
nHloIn = 10
nInvHlo = 0
nLsuIn = 17
nLsaIn = 10
attHloOut = 11
nHloOut = 11
attLsuOut = 12
nLsuOut = 12
attLsaOut = 17
nLsaOut = 17
switch:admin> nbrstatsclear 1/0
22
nbrStatsClear
527