Brocade Communications Systems Brocade 8/12c Command Reference Manual page 842

22
portShow
EXAMPLES
To display the connection parameter information for all FCIP tunnels on the switch and to show the
current DiffServ markings being used for data connection as well as control connection (The following
example displays high-water marks in bold for the data and control TCP connections of Tunnel 0):
808
-mem adrs
Displays memory in 256-byte increments: ! for next.
-pools
Displays current data buffer pool counts.
-pmmr
Displays PMMR pointers.
-fastw
Displays the FastWrite queue.
-clear
Clears post-display statistics; requires a preceding argument.
switch:admin> portshow fciptunnel -all -params
Port: ge0
-------------------------------------------
Tunnel ID 0
Tunnel Description "Test Description"
Remote IP Addr 192.168.10.2
Local IP Addr 192.168.44.9
Remote WWN Not Configured
Local WWN 10:00:00:05:1e:38:84:65
Compssion off
Fastwrite off
Tape Pipelining off
ACK on
Min Retransmit Time 100
Keepalive Timeout 10
Max Retransmissions 8
VC QoS Mapping off
DSCP Marking (Control): 0, DSCP Marking (Data): 0
TCP Byte Streaming on
Status : Inactive
Connected Count: 0
Port: ge1
-------------------------------------------
Tunnel ID 0
Tunnel Description "Test Description"
Remote IP Addr 192.168.10.10
Local IP Addr 192.168.10.2
Remote WWN Not Configured
Local WWN 10:00:00:05:1e:39:37:5f
Compression off
Fastwrite off
Tape Pipelining off
Committed Rate 900000 Kbps (0.900000 Gbps)
SACK on
Min Retransmit Time 100
Keepalive Timeout 10
Max Retransmissions 8
VC QoS Mapping off
DSCP Marking (Control): 0, DSCP Marking (Data): 0
VLAN Tagging Not Configured
TCP Byte Streaming on
Status : Active
Fabric OS Command Reference
53-1001764-01