To add all trigger conditions except the LOSN condition:
To attempt to enable and configure the port autodisable feature on a port for which the feature is already
activated (the configuration is not updated):
To enable the port autodisable feature on a range of ports:
To enable the port autodisable feature for a range of ports, some of which were previously enabled (the
configuration is applied only to those ports, for which an update is necessary, that is, port 3 in the
following example):
SEE ALSO
portCfgShow,
Fabric OS Command Reference
53-1001764-01
switch:admin> portcfgautodisable --addexcept LOSN 18
switch:admin> portcfgautodisable --show 18
Port Auto Disable: ON
Configured Option(s): LOSG
switch:admin> portcfgautodisable --show 18
Port Auto Disable: ON
Configured Option(s): LOSG
switch:admin> portcfgautodisable --enable 18
Same configuration for port 18
switch:admin> portcfgautodisable --addexcept LOSN 18
Same configuration for port 18
switch:admin> portcfgautodisable --enable 0-2
switch:admin> portcfgautodisable --show 0-2
Port Auto Disable: ON
Configured Option(s):No events configured.
Port will not be automatically disabled.
Port Auto Disable: ON
Configured Option(s):No events configured.
Port will not be automatically disabled.
Port Auto Disable: ON
Configured Option(s):No events configured.
Port will not be automatically disabled.
switch:admin> portcfgautodisable --enable 0-3
Same configuration for port 0
Same configuration for port 1
Same configuration for port 2
portEnable
OLS
NOS
LIP
OLS
NOS
LIP
portCfgAutoDisable
22
631