Brocade Communications Systems Brocade 8/12c Command Reference Manual page 466

22
interfaceShow
downReason
iState
state
lastTransition
nghbCap
nghbId
idbNo
remPort
nflags
initCount
lastInit
firstHlo
nbstFull
&dbRetransList
&lsrRetransList
&lsrAckList
inactTID
helloTID
dbRtxTID
lsrRtxTID
inactTo
432
Type of last State Change Notification that caused this interface to go down.
Current state of this interface. The state can be UP or DOWN. An interface in
DOWN state does not have an allocated neighbor data structure and cannot be
used to route traffic to other switches.
Current state of this interface. This E_Port is used to route traffic to other switches
only if the state is NB_ST_FULL.
Time the last state changed on this interface.
Neighbor capabilities. Should be 0.
Domain ID of the neighbor (adjacent) switch.
IDB number. Should be equal to port.
Port number on the remote switch connected to this port.
Internal FSPF flags.
Number of times this neighbor was initialized without the interface going down.
Time of the last initializing state, NB_ST_INIT, on this interface.
Time of the first hello sent on this interface.
Time of the last finishing state, NB_ST_FULL, on this interface.
Pointer to the database retransmission list.
Pointer to the link state records (LSR) retransmission list.
Pointer to the link state acknowledgements (LSA) retransmission list.
Inactivity timer ID.
Hello timer ID.
Database retransmission timer ID.
LSR retransmission timer ID.
Inactivity timeout value, in milliseconds. When this timeout expires, the adjacency
with the neighbor switch is broken and new paths are computed to all possible
destination switches in the fabric.
Fabric OS Command Reference
53-1001764-01