Ficonshow - Brocade Communications Systems Brocade 8/12c Command Reference Manual

ficonShow

Displays the contents of the specified FICON database.
SYNOPSIS
ficonshow database [fabric]
DESCRIPTION
Use this command to display the contents of a FICON database. The ficonShow database operand is
the name of the database to display. If the fabric operand is absent, the command displays the members
of the named database that are local to the switch on which the command was issued. If the fabric
operand is present, it must be entered exactly as shown, and this specifies that all members are
displayed, both local and remote.
The following information may be displayed, depending on which database you enter and which
operands you use with the command:
Domain
Fabric WWN
Flag
Fmt
FRU Failure Description
FRU Part Number
FRU Serial Number
Fabric OS Command Reference
53-1001764-01
Displays the domain ID.
Displays the fabric WWN.
Indicates if the node is valid, not valid, or not current. Flag values are as follows:
0x00
Indicates the node ID of the storage port is valid.
0x10
Indicates the node ID of the channel port is valid.
0x20
Indicates the node ID of the storage port is not current.
0x30
Indicates the node ID of the channel port is not current.
0x40
Indicates the node ID of the storage port for the RNID switch for RLIR is not valid.
0x50
Indicates the node ID of the channel port is not valid.
Displays the record-registration format.
Indicates the FRU failure type as one of the following:
WWN card [unit number]
The WWN card
Power Supply [unit number]
The Power Supply card
Hardware Slot [unit number]
The Hardware Slot
Blower [unit number]
The Blower
Displays the FRU part number.
Displays the FRU serial number.
22
ficonShow
343