Agshow - Brocade Communications Systems Brocade 8/12c Command Reference Manual

22

agShow

agShow
Displays the Access Gateway information registered with the fabric.
SYNOPSIS
agshow
agshow --name ag_name
agshow --local
DESCRIPTION
This command displays the details of the F_Ports and the configured N_Ports in the Access Gateway
attached to the fabric. The command output displays the following information.
Name
NodeName
Ports
Enet IP Addr
Firmware
Local/Remote
World Wide Name
N-Port ID(s)
N-Ports
F-Ports
Attached F-Port information
Access Gateway F-Port information
NOTES
NPIV capability should be enabled on the ports connected to the Access Gateway. NPIV capability is
enabled by default. Use portCfgNPIVPort to enable NPIV capability a port if it was previously disabled.
Note that enabling or disabling NPIV capability is no longer supported in Access Gateway mode.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
42
The name of the Access Gateway.
The World Wide Name of the Access Gateway node.
The number of ports in the Access Gateway.
The IP address of the Access Gateway.
Current firmware running on the Access Gateway.
Indicates whether the Access Gateway is locally or remotely registered to this
switch.
The world wide name (WWN) of the given Access Gateway.
The port ids of the N_Ports configured in the given Access Gateway.
The number of configured N_Ports that are online.
The number of F_Ports that are online.
Displays the Port ID and the Port WWN of each F_Port that is online on the
Access Gateway.
Displays the port number, the port ID, and the Port WWN of the Access Gateway
to which the F_Port is connected. This information is displayed only if both the
Access Gateway and the switch to which the Access Gateway is attached are
running Fabric OS v.7.0.0. The data in this section is not always synchronized with
the data in the Attached F-Port information section.
Fabric OS Command Reference
53-1001764-01