Haenable - Brocade Communications Systems Brocade 8/12c Command Reference Manual

22

haEnable

haEnable
Enables the High Availability feature.
SYNOPSIS
haenable
DESCRIPTION
Use this command to enable the High Availability (HA) feature on a switch. If the HA feature is already
enabled, this command has no effect.
If the HA feature is disabled, this command enables it. The standby CP reboots as part of the process.
The command displays a warning message and prompts for confirmation before rebooting the CP.
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
None
EXAMPLES
To enable the High Availability feature on a Brocade DCX 85120-8:
To verify that High Availability is enabled:
SEE ALSO
haDisable,
410
switch:admin> haenable
Warning: This command will enable the HA. It will reboot the standby
CP and require all telnet, secure telnet, and SSH sessions to the
standby CP to be restarted
Are you sure you want to go ahead
y
switch:admin> hashow
Local CP (Slot 7, CP1): Active, Warm Recovered
Remote CP (Slot 6, CP0): Standby, Healthy
HA enabled, Heartbeat Up, HA State synchronized
reBoot
[y/n]?y
Fabric OS Command Reference
53-1001764-01