Brocade Communications Systems Brocade 8/12c Command Reference Manual page 1022

22
switchStatusPolicySet
ErrorPorts
To determine the current status of the switch for each component monitored issue the
switchStatusShow command.
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
None
EXAMPLES
To change the switch policy parameters on a Brocade 6510:
988
Percentage of ports segmented and disabled due to security violations or Fabric
Watch port fencing.
switch:admin> switchstatuspolicyset
To change the overall switch status policy parameters
The current overall switch status policy parameters:
Down
----------------------------------
PowerSupplies
Temperatures
Fans
Flash
MarginalPorts 25.00%[12]
FaultyPorts 25.00%[12]
MissingSFPs 0.00%[0]
ErrorPorts 0.00%[0]
Number of ports: 48
Note that the value, 0, for a parameter, means that it is
NOT used in the calculation.
** In addition, if the range of settable values in the prompt is (0..0),
** the policy parameter is NOT applicable to the switch.
** Simply hit the Return key.
The minimum number of
Bad PowerSupplies contributing to DOWN status: (0..2) [2]
Bad PowerSupplies contributing to MARGINAL status: (0..2) [1]
Bad Temperatures contributing to DOWN status: (0..4) [2]1
Bad Temperatures contributing to MARGINAL status: (0..4) [1]2
Bad Fans contributing to DOWN status: (0..2) [2]
Bad Fans contributing to MARGINAL status: (0..2) [1]
Out of range Flash contributing to DOWN status: (0..1) [0]
Out of range Flash contributing to MARGINAL status: (0..1) [1]
MarginalPorts contributing to DOWN status: (0..100) [25.00]
MarginalPorts contributing to MARGINAL status: (0..100) [10.00]
FaultyPorts contributing to DOWN status: (0..100) [25.00]
FaultyPorts contributing to MARGINAL status: (0..100) [10.00]
MissingSFPs contributing to DOWN status: (0..100) [0.00]
MissingSFPs contributing to MARGINAL status: (0..100) [0.00]
ErrorPorts contributing to DOWN status: (0..100) [0.00]
ErrorPorts contributing to MARGINAL status: (0..100) [0.00]
Policy parameter set has been changed
Marginal
2 1
2 1
2 1
0 1
10.00%[5]
10.00%[5]
0.00%[0]
0.00%[0]
Fabric OS Command Reference
53-1001764-01