Secglobalshow - Brocade Communications Systems Brocade 8/12c Command Reference Manual

secGlobalShow

Displays the current internal security state information.
SYNOPSIS
secglobalshow
DESCRIPTION
Use this command to display security server-specific information as a snapshot of its current state. The
output may include information about the following:
•
•
•
•
•
This command is intended primarily for debugging purposes by technical support staff. The information
displayed may not be supported between releases and is subject to change without notice.
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
None
EXAMPLES
To view the current security state:
Fabric OS Command Reference
53-1001764-01
General security parameters
The latest zone transaction
The current status of the RCS transaction
The state of the Domain
wwnDL state
switch:admin> secglobalshow
----General Security Information----
flag 1, saveflag 0
transId 0
Queue Size 0
final Rca 0
reliablemsg 0
reliablePhase 0
Primary pub key: Empty
Primary Version 0
Primary WWN 10:00:00:05:1e:01:23:e0 (local switch)
Stamp 0
----The latest zone transaction--
last retVal from zone: not used
last zone size when calling zone: not used
----The latest RCS STATUS----
RCS was enabled
sec_aca: free
RCS latest Phase: Completion
RCS Message ==> RCS transaction completes.
----DataBase STATUS----
Retry Role 0
Retry Qeury0
Security Active DataSize 35 bytes
-----Domain State-----
Active Sum 215b
Security Defined DataSize 35 bytes
Define Sum 215b
22
secGlobalShow
877