Brocade Communications Systems Brocade 8/12c Command Reference Manual page 725

To display FCIP tunnels configured on a Brocade FR4-18i FC (refer to the portCfg help page for an
explanation of the displayed parameters):
Fabric OS Command Reference
53-1001764-01
VC Link Init
Locked L_Port
Locked G_Port
Disabled E_Port
ISL R_RDY Mode
RSCN Suppressed
Persistent Disable
LOS TOV enable
NPIV capability
QOS E_Port
Port Auto Disable:
Rate Limit
EX Port
Mirror Port
Credit Recovery
F_Port Buffers
NPIV PP Limit:
CSCTL mode:
Fault Delay
FEC
switch:admin> portcfgshow 12/ge0
Mode:
Persistent Disable:
Ipif configuration:
Interface IP Address
----------------------------------------------------------
0 192.168.100.50
1 192.168.100.51
2 192.168.100.52
3 192.168.100.53
4 192.168.100.54
5 192.168.100.55
6 192.168.100.56
7 192.168.100.57
Arp configuration:
IP Address Mac Address
------------------------------
Iproute Configuration:
IP Address Mask
------------------------------------------------------
IPv6 Address
Metric
-------------------------------------------------------
Fciptunnel configuration:
IPV4 FCIP TUNNEL(S)
-------------------------------------------
Tunnel ID 0
Remote IP Addr 192.168.100.40
Local IP Addr 192.168.100.50
Remote WWN Not Configured
Local WWN 10:00:00:05:1e:40:68:78
Compression off
OFF
OFF
OFF
OFF
OFF
OFF
OFF
OFF
ON
AE
OFF
OFF
ON
OFF
ON
OFF
126
OFF
1(1.2sec)
active
FCIP
OFF
NetMask
255.255.255.0
255.255.255.0
255.255.255.0
255.255.255.0
255.255.255.0
255.255.255.0
255.255.255.0
255.255.255.0
Gateway
Len
portCfgShow
MTU
1500
1500
1500
1500
1500
1500
1500
1500
Metric
Gateway
22
691