Brocade Communications Systems Brocade 8/12c Command Reference Manual page 750

22
portDPortTest
EXAMPLES
To initiate the D_Port test on a single port:
To terminate the D_Port test on a single port:
To display the runtime status for a single D_Port while the test is in progress:
To display D_Port summary information:
SEE ALSO
fabricLog, portCfg, portCfgDPort, portShow,
716
switch:admin> portdporttest --start
switch:admin> portdporttest --stop
switch:admin> portdporttest --show 42
D-Port Information:
===================
Port: 42
Remote WWNN: 10:00:00:05:33:13:2f:b4
Remote port: 26
Mode: Automatic
Start time: Wed Feb
End time: Wed Feb
Status: PASSED
============================================================
Test
============================================================
Electrical loopback
Optical loopback
Link traffic test
============================================================
Roundtrip link latency:
Estimated cable distance:
switch:admin> portdporttest
Port State SFP Capabilities
=============================================
24 ONLINE E,O
26 ONLINE E,O
33 OFFLINE ---
2 01:41:35 2011
2 01:43:23 2011
Start time Result EST(secs)
01:42:12 PASSED
01:43:10 PASSED
01:43:17 PASSED
1108 nano-seconds
20 meters
--show all 42
Test Result
PASSED
RESPONDER
RESPONDER
switchShow
Comments
-- ---------
-- ---------
-- ---------
Fabric OS Command Reference
53-1001764-01