Brocade Communications Systems Brocade 8/12c Command Reference Manual page 206

22
cryptoCfg
--show -groupmember
--show -egstatus
--sync -encgroup
--sync -securitydb
EXAMPLES
To create an encryption group "brocade":
To create an encryption group "brocade" on a node that has stale configurations:
To delete the encryption group "brocade":
172
Displays detailed information for all encryption group members or for a single
member. This command is valid on all member nodes and on the group leader.
The following required operands are mutually exclusive:
-all
Displays information on all nodes in the existing encryption group.
node_WWN
Displays information on a single specified node. The node is identified by its node
WWN.
Displays encryption group configuration or status information for all nodes in the
encryption group. The following operands are exclusive:
-cfg
Displays encryption group configuration information.
-stat
Displays encryption group status information.
Manually synchronizes the encryption group database belonging to the group
leader node with the databases of all member nodes that are out of sync. If this
command is invoked when the encryption group databases are in sync, the
command is ignored.
Note: When the encryption group is out of sync and the group leader reboots, the
newly selected group leader pushes its database information to all other
members. The new group leader's database information may be different from
what was set up before the group leader was rebooted.
Distributes the security database from the group leader node to all member
nodes. This operation can resolve problems with master key propagation. The
synchronization occurs every time this command is executed regardless of
whether or not the security database was in sync across all nodes in the
encryption group. This command is valid only on the group leader.
SecurityAdmin:switch> cryptocfg --create -encgroup brocade
Encryption group create status: Operation Succeeded.
SecurityAdmin:switch> cryptocfg --create -encgroup brocade
Warning: There are stale (Container|HA|Tape) cryptodb configurations.
Please confirm to delete them.
ARE YOU SURE (yes, y, no, n): [no] y
Warning: These are the list of
to be cleaned up:
Inside /etc/fabos/mace (crypto_dek.db.0, crypto_dev.db.0, \
crypto_hac.db.0, crypto_pool.db.0, crypto_wwn.db.0).
ARE YOU SURE (yes, y, no, n): [yes]y
Encryption group create status: Operation Succeeded.
SecurityAdmin:switch> cryptocfg --delete -encgroup brocade
Encryption group create status: Operation Succeeded.
crypto configuration \
Fabric OS Command Reference
53-1001764-01