Tempshow - Brocade Communications Systems Brocade 8/12c Command Reference Manual

22

tempShow

tempShow
Displays temperature readings.
SYNOPSIS
tempshow
DESCRIPTION
Use this command to display the current temperature readings of all temperature sensors in a switch. For
each sensor, this command displays the sensor ID (an index number), the slot number (if applicable), the
sensor state (OK or absent), and the temperature. The temperature readings are given in both
Centigrade and Fahrenheit.
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
Refer to the hardware reference manual for your switch to determine the normal temperature range.
OPERANDS
None
EXAMPLES
To display temperature and status sensors:
SEE ALSO
fanShow, psShow, sensorShow,
1008
switch:user> tempshow
Sensor Slot State
ID
========================================================
1 1 Ok
2 1 Ok
3 1 Ok
4 1 Ok
5 1 Ok
6 2 Ok
7 2 Ok
8 2 Ok
9 2 Ok
10 2 Ok
Centigrade
38
28
40
31
43
39
28
40
30
43
slotShow
Fahrenheit
100
82
104
87
109
102
82
104
86
109
Fabric OS Command Reference
53-1001764-01