Brocade Communications Systems Brocade 8/12c Command Reference Manual page 68

22
ag
To set and display failback policy settings on a single port:
Port Group commands
To display Port Group information:
To create a port group "FirstFabric" that includes N_Ports 1 and 3 and has login balancing enabled:
To rename the port group with pgid 2 to "MyEvenFabric":
34
switch:admin> ag --failbackenable 0
Failback policy cannot be enabled since failover
policy is disabled for port 0
switch:admin> ag --failbackenable 2
Failback policy is enabled for port 2
switch:admin> ag --failbackenable 3
Failback on N_Port 3 is not supported
switch:admin> ag --failbackenable 2
Failback on N_Port 2 is supported
switch:admin> ag --pgshow
PG_ID PG_Name PG_Mode
-----------------------------------------------
0 pg0 lb,mfnm
2 SecondFabric
-----------------------------------------------
switch:admin> ag --pgcreate 3 "1;3" -n FirstFabric1 -m "lb"
Port Group 3 created successfully
switch:admin> ag --pgshow
PG_ID PG_Name PG_Mode
-----------------------------------------------
0 pg0 lb,mfnm
2 SecondFabric
3 FirstFabric
-----------------------------------------------
switch:admin> ag --pgrename 2 MyEvenFabric
Port Group 2 has been renamed as MyEvenFabric successfully
switch:admin> ag --pgshow
PG_ID PG_Name PG_Mode
-----------------------------------------------
0 pg0 lb,mfnm
2 MyEvenFabric
3 FirstFabric
-----------------------------------------------
N_Ports F_Ports
1;3 10;11
- 0;2 4;5;6
N_Ports F_Ports
none none
- 0;2 4;5;6
lb 1;3 10;11
N_Ports F_Ports
none none
- 0;2 4;5;6
lb 1;3 10;11
Fabric OS Command Reference
53-1001764-01