Errclear - Brocade Communications Systems Brocade 8/12c Command Reference Manual

errClear

Clears all error log messages for all switch instances on this Control Processor (CP).
SYNOPSIS
errclear
DESCRIPTION
Use this command to clear all internal and external error log messages for all switch instances on the CP
where the command is executed. For products with a single processor, all error log messages are
cleared. For products that contain multiple processors, this command can be executed on either control
processor. It clears the error log only on the CP where the command is executed. For example, to clear
the error log on the standby CP, issue errclear on the standby CP.
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
None
EXAMPLES
To clear the error log messages:
SEE ALSO
errDump,
Fabric OS Command Reference
53-1001764-01
switch:admin> errclear
errShow
22
errClear
233