Seccertutil - Brocade Communications Systems Brocade 8/12c Command Reference Manual

secCertUtil

Manages certificates on a switch.
SYNOPSIS
seccertutil
seccertutil genkey [-nowarn] [-keysize 1024 | 2048]
seccertutil delkey [-nowarn][-all]
seccertutil gencsr [-country country code] [-state state]
[-locality locality] [-org organization]
[-orgunit organization unit] [-cn common name]
seccertutil delcsr [-nowarn]
seccertutil showcsr
seccertutil generate [-fcapall][-keysize 1024 | 2048]
seccertutil delete [-ldapcacert file name ] | [-fcapcacert] |
[-fcapswcert] | [-fcapall] [-nowarn]
seccertutil export [-ldapcacert [-certname certificate name]] |
[-fcapswcert] | [-fcapswcsr] | [-fcapcacert]
[-protocol ftp | scp][-ipaddr IP address]
[-remotedir remote directory ] [-login login name]
[-password password]
seccertutil import [-ldapcacert] | [-fcapswcert] |
[-fcapcacert] | [-config cacert] |
[-config swcert [-nowarn]
[-enable https]] [-protocol ftp | scp] [-ipaddr IP address]
[-remotedir remote directory ] [-certname certificate name]
[-login login name] [-password password]
seccertutil show [-ldapcacert] | [-fcapall] | [-fcapswcert] | [filename]
DESCRIPTION
Use this command to manage third-party certificates on a switch, including Public Key Infrastructure
(PKI) based certificates, Lightweight Directory Access Protocol (LDAP) certificates, and FCAP
certificates. This command also imports or exports Certificate Signing Requests (CSRs) from or to a
remote host. This command supports IPV4 and IPV6 addresses.
Use this command to do the following:
•
•
•
•
•
•
•
•
Fabric OS Command Reference
53-1001764-01
Generate a public/private key pair.
Delete a public/private key pair.
Generate a CSR.
Delete a CSR.
List existing certificates on a switch.
Display the contents of a certificate or CSR.
Delete a specified certificate.
Import or export a certificate.
22
secCertUtil
867