Supportffdc - Brocade Communications Systems Brocade 8/12c Command Reference Manual

22

supportFfdc

supportFfdc
Modifies or displays the first-fault data capture (FFDC) daemon.
SYNOPSIS
supportffdc [--disable | --enable | --show]
DESCRIPTION
Use this command to disable or enable the FFDC events, or to display the current configuration. If
disabled, the daemon does not capture any data even when a message with FFDC attributes is logged.
FFDC is enabled by default. When executed without operands, the command prints the usage.
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
This command has the following operands:
--disable
--enable
--show
EXAMPLES
To display the FFDC configuration:
To enable the FFDC events:
SEE ALSO
None
950
Disables the FFDC.
Enables the FFDC.
Displays the FFDC configuration parameters.
switch:admin> supportffdc --show
First Failure Data Capture (FFDC) is disabled.
switch:admin> supportffdc --enable
First Failure Data Capture (FFDC) is enabled.
Fabric OS Command Reference
53-1001764-01