Brocade Communications Systems Brocade 8/12c Command Reference Manual page 1014

22
switchShow
OPERANDS
This command has the following operands:
-slot slot
-portname
-portcount
-iscsi
-qsfp
EXAMPLES
To display the port count:
To display GbE ports with iSCSI sessions:
To display a QoS-capable Core Access Gateway with online AoQ F_Ports and N_Ports:
980
Displays blade information. You can specify this operand with -portname, but not
with any other operand.
Displays the name for each port on the switch. The port name is set by the
portName command. You can specify this operand with -slot, but not with any
other operand.
Displays the number of ports on the switch. This operand is exclusive.
Displays the number of ports on the iSCSI sessions associated with GbE ports in
a switch. This operand is exclusive. (Deprecated)
Displays the output of the switchShow command with a QSFP column added. If a
QSFP is installed on the port, the QSFP number is displayed for the port. This
number corresponds to the physical QSFP number that can be found on the front
of each Core Blade. A double dash (--) indicates that no QSFP is present.
switch:admin> switchshow -portcount
FC ports = 198, GE ports =
switch:admin> switchshow -iscsi
Ports of Slot 1 ge0 ge1 ge2 ge3
-----------------+---+---+---+---+-----+---+---+---
Sessions 0
switch:admin> switchshow
switchName: Spirit_125
switchType: 66.1
switchState: Online
switchMode: Access Gateway Mode
switchWwn: 10:00:00:05:1e:85:95:d0
switchBeacon: OFF
FC Router: OFF
FC Router BB Fabric ID: 1
Area Port Media Speed State
=====================================
0 0 -- N8
1 1 -- N8
2 2 -- N8
3 3 -- N8
4 4 -- N8
5 5 -- N8
6 6 -- N8
7 7 -- N8
8 8 -- N8
9 9 id N8
10:00:00:05:1e:53:2c:54 0x690105 (AoQ)
10 10 id N8
12
ge4 ge5 ge6 ge7
0 0 0 0
Proto
No_Module FC
No_Module FC
No_Module FC
No_Module FC
No_Module FC
No_Module FC
No_Module FC
No_Module FC
No_Module FC
Online FC F-Port \
Online FC F-Port
0 0 0
\
Fabric OS Command Reference
53-1001764-01