Brocade Communications Systems Brocade 8/12c Command Reference Manual page 802

Brocade fabric os command reference manual supporting fabric os v7.0.0 (april 2011)
Hide thumbs Also See for Brocade 8/12c:
Table of Contents

Advertisement

22
portShow
DH Group
Hash Algorithm
Edge fabric's primary WWN
Edge fabric's version stamp
The portShow command displays FCoE ports with "Protocol: FCoE" and "portSpeed: 10Gbps". Only a
subset of information is displayed. Refer to the Examples section for an illustration. Use fcoe --cfgshow
and fcoe --loginshow to display FCoE-specific configuration details.
Following the general information, the command displays three columns of counters. The first column
shows interrupt statistics:
Interrupts
Unknown
Lli
Proc_rqrd
Timed_out
Rx_flushed
Tx_unavail
Free_buffer
Overrun
Suspended
Parity_err
2_parity_err
CMI_bus_err
The second column displays link error status block counters.
The third column shows the number of F_RJTs and F_BSYs generated. For L_Ports, the third column
also displays the number of loop initialization protocols (LIPs) received, number of LIPs transmitted, and
the last LIP received.
768
Displays DH group [0-4] if DH-CHAP authentication is used. Otherwise displays
N/A.
Displays hash type (MD5 or SHA-1) if DH-CHAP authentication is used.
Otherwise, displays N/A.
If the EX_Port is connected to an edge switch with FCS policy enforcement, the
WWN of the primary FCS is displayed when the edge fabric is secure and the
primary FCS is online. Otherwise, displays "No Primary".
If the EX_PORT is connected to an edge switch with FCS policy enforcement, the
version of the security database is displayed. Otherwise displays N/A.
Total number of interrupts.
Interrupts that are not counted elsewhere.
Low-level interface (physical state, primitive sequences).
Frames delivered for embedded N_Port processing.
Frames that have timed out.
Frames requiring translation.
Frames returned from an unavailable transmitter.
Free buffer available interrupts.
Buffer overrun interrupts.
Transmission suspended interrupts.
Central memory parity errors.
Secondary transmission parity errors.
Control message interface errors.
Fabric OS Command Reference
53-1001764-01

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fabric os v7.0.0

Table of Contents