Brocade Communications Systems Brocade 8/12c Command Reference Manual page 840

22
portShow
OOO H
Dup ACK
Rtx Dup ACK
Fast Rtx
F Rtx H
Slow Rtx
InFlt H
SlowStarts
Rtx TO
Rtx Rtx TO
NOTES
The Byte Streaming feature is no longer supported as of Fabric OS v7.0.0.
OPERANDS
This command supports the following operands:
slot
[ge]port
all | tunnel_id
fciptunnel
806
Out-of-order segments high water mark
Counter of duplicate ACKs
Counter of retransmit packets due to duplicate ACK
Fast retransmits
Fast retransmits high water mark
Slow retransmits
Packets in-flight high water mark
Counter of slow starts
Retransmit timeouts
Counter of retransmit packets due to timeout.
For bladed systems only, specify the slot number of the port to be configured,
followed by a slash (/).
Specifies the GbE port number to be displayed relative to its slot for bladed
systems. GbE ports on the Brocade 7500/7500E and FX-18i are numbered ge0
and ge1. See switchShow for a listing of valid ports.
For FCIP-related command options only, specify all to display all FCIP tunnels or
a Tunnel ID between 0 and 7 to display a single FCIP tunnel.
Displays FCIP tunnel IDs, remote and local IP addresses, remote and local
WWNs, compression status, FCIP FastWrite status, Tape Pipelining status,
bandwidth rate, SACK status, Minimum Retransmit time, Keepalive Timeout,
Maximum Retransmissions, DSCP Marking, tunnel status, tunnel uptime. Refer to
portCfg help for an explanation of these parameters.
Additional optional arguments for fciptunnel include the following:
-perf
Displays additional performance information.
-params
Displays connection parameter information. The display includes the following
High Water Marks:
•
Packets in flight
•
Round trip time
•
Round trip time variance
Fabric OS Command Reference
53-1001764-01