Fcoelogincfg - Brocade Communications Systems Brocade 8/12c Command Reference Manual

fcoeLoginCfg

Manages or displays the FCoE login configuration.
SYNOPSIS
fcoelogincfg --show
[-switch swwn | -logingroup lgname]
[-saved] | [-mergestatus]
fcoelogincfg --save
fcoelogincfg --transshow
fcoelogincfg --transabort
fcoelogincfg --purge -conflicting [-nonexisting]
fcoelogincfg --purge -nonexisting [-conflicting]
fcoelogincfg --enable
fcoelogincfg --disable
fcoelogincfg --help
DESCRIPTION
Use this command to save, abort, or display the current FCoE login configuration, including ongoing
transactions and the effective (saved) configuration.
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
The FCoE Login management feature is not supported in Access Gateway mode.
OPERANDS
This command has the following operands.
--help
--show
--save
Fabric OS Command Reference
53-1001764-01
Displays the command usage.
Displays the state of the FCoE login configuration including current transactions
and effective (saved) configuration.
-switch swwn
Displays the login groups for the specified switch.
-logingroup lgname
Displays the login group configuration for the specified login group.
-saved
Displays only the effective configuration.
-mergestatus
Displays the status of the last configuration merge during the last fabric merge.
This operand also displays conflicting login groups and login groups for
nonexisting switches.
Saves and applies FCoE login configuration changes as the effective
configuration fabric-wide.
22
fcoeLoginCfg
279