Brocade Communications Systems Brocade 8/12c Command Reference Manual page 219

•
•
•
•
•
•
•
•
•
•
Use the --show -tapepool command to display tape pool configuration parameters for all Tape pools or
for a specific tape pool. For each tape pool, the display includes the following information:
•
•
•
•
•
Use the --show -LUN command for a listing of Crypto LUN status or configuration information for a
specific CTC.
When used with -stat the display includes the following LUN runtime status information:
•
•
•
•
•
•
•
•
•
•
•
•
•
Fabric OS Command Reference
53-1001764-01
Key life (in days); number of days until expiration
Rekey status: numeric value
Key expiration time
Rekey session number: numeric value
Percentage complete
Rekey state: Read or write Phase
Rekey role: primary, alternate
Block size: numeric value
Number of blocks: numeric value
Current logical block address (LBA) being processed
tape pool Label: user-define label
Key Life: Life span in days
Encryption mode: encrypt or cleartext
Encryption format: native or DF compatible
Configuration status: committed or defined
Container name: user-defined label
Type: disk or tape
EE node: node WWN
EE slot: EE slot number
Target: target port WWN and node WWN
Target PID
VT: virtual target port WWN and node WWN
VT PID: virtual target PID
Number of hosts: numeric value
Number of rekey (or tape) sessions: numeric value
For each host:
-
Host PWWN, NWWN: host port WWN and node WWN
-
Host PID: host port ID
-
VI PWWN, NWWN: virtual initiator port WWN and node WWN
-
VI PID: virtual initiator port ID
Number of LUNs: numeric value
For each LUN:
-
LUN number: numeric value
-
LUN type: disk, tape drive, tape medium changer, tape attached medium changer,
offline/unknown, or unsupported/other
-
LUN serial number: alpha-numeric ID
-
Encryption mode: encrypt or cleartext
-
Encryption format: native or DF-compatible
-
Encrypt existing data: enabled or disabled
-
Rekey: enabled or disabled
22
cryptoCfg
185