Brocade Communications Systems Brocade 8/12c Command Reference Manual page 198

22
cryptoCfg
To display the key vault diagnostics configuration:
To change the interval at which the key vault diagnostics is run:
FUNCTION
2. Encryption group configuration
SYNOPSIS
cryptocfg --help -groupcfg
cryptocfg --create -encgroup encryption_group_name
cryptocfg --delete -encgroup encryption_group_name
cryptocfg --reg -keyvault cert_label certfile hostname |
ip_address primary | secondary
cryptocfg --dereg -keyvault cert_label
cryptocfg --reg -KACcert signed_certfile primary | secondary
cryptocfg --set -keyvault LKM | RKM | SKM | TEMS
cryptocfg --set -failbackmode auto | manual
cryptocfg --set -hbmisses value
cryptocfg --set -hbtimeout value
cryptocfg --set -quorumsize value
cryptocfg --set -systemcard enable | disable
cryptocfg --set -replication enable | disable
cryptocfg --add -membernode node_WWN
cryptocfg --eject -membernode node_WWN
cryptocfg --leave_encryption_group
cryptocfg --genmasterkey
cryptocfg --exportmasterkey [-file]
cryptocfg --recovermasterkey currentMK | alternateMK
-keyID keyID | -srcfile filename
164
switch:admin> cryptocfg --kvdiag -show
Key vault diagnostic periodic tests Enabled
Interval: 5 minute(s)
Test Type: (diag) key retrieval/archival readiness
Operation succeeded
switch:admin> cryptocfg --kvdiag -interval 60
Key vault diagnostic periodic tests Enabled
Interval: 60 minute(s)
Test Type: (diag) key retrieval/archival readiness
Operation succeeded
Fabric OS Command Reference
53-1001764-01