Brocade Communications Systems Brocade 8/12c Command Reference Manual page 67

AG failover policy commands
To display failover policy settings for all N_Ports:
To set and display failover and failback policies on a single port:
To display failback policy settings for all the N_Ports:
Fabric OS Command Reference
53-1001764-01
_F_Ports _F_Ports
--------------------------------------------------------------
0 None
17 2
--------------------------------------------------------------
Static N-Port to F-Port Mapping
N-Port F-Port
--------------------------------------------------------------
17 1
--------------------------------------------------------------
switch:admin> ag --failovershow
N_Port failover_bit
---------------------------
0 1
1 0
2 1
3 0
switch:admin> ag --failoverenable 1
Failover policy is enabled for port 1
switch:admin> ag --failoverdisable 0
Failover policy is disabled for port 0
switch:admin> ag --failovershow 0
Failover on N_Port 0 is not supported
switch:admin> ag --failbackdisable 2
Failback policy is disabled for port 2
switch:admin> ag --failbackshow 2
Failback on N_Port 2 is not supported
switch:admin> ag --failbackenable 2
Failback policy is enabled for port 2
switch:admin> ag --failbackshow
N_Port failback_bit
---------------------------
0 0
1 1
2 0
3 1
None 1 1
2 0 0
ag
N/A N/A
N/A N/A
22
33