Portstatsshow - Brocade Communications Systems Brocade 8/12c Command Reference Manual

portStatsShow

Displays port hardware statistics.
SYNOPSIS
portstatsshow [slot/]port
portstatsshow -i [index1[-index2][...] [-f]]
portstatsshow -slot [slot1[-slot2][...]
portstatsshow ge [slot/]ge port
portstatsshow ip [slot/]ge port [ip_address]
portstatsshow fcip [slot/]ge port [tunnel_number]
portstatsshow -h
DESCRIPTION
Use this command to display port hardware statistics counters. Some counters are platform- or
port-specific and display only on those platforms and ports. All statistics have a maximum 32-bit value of
4,294,967,295.
You can display statistics for a single port identified by its port number or by its port index. Port ranges
are supported with index numbers and by specifying a slot or a slot range. Use switchShow for a listing
of valid ports, slots, and port index numbers.
Specifying multiple ports with the index (-i) or slot (-s) option is supported only if PortSwap is disabled.
They are not supported on GbE ports and configured F_Port trunks. Use the -i option without a port index
to display the portSwap status, or alternately use portSwapShow.
The command output may include the following fields (Tx indicates frames transmitted by the port; Rx
indicates frames received by the port).
stat_wtx
stat_wrx
stat_ftx
stat_frx
stat_c2_frx
stat_c3_frx
stat_lc_rx
stat_mc_rx
stat_mc_to
stat_mc_tx
Fabric OS Command Reference
53-1001764-01
The number of 4-byte words transmitted.
The number of 4-byte words received.
The number of frames transmitted.
The number of frames received.
The number of class 2 frames received.
The number of class 3 frames received.
The number of link control frames received.
The number of multicast frames received.
The number of multicast timeouts.
The number of multicast frames transmitted.
22
portStatsShow
823