Brocade Communications Systems Brocade 8/12c Command Reference Manual page 661

To modify the default VC QoS map settings for VC 1:
To return the VC QoS map settings to default values:
To create an FCIP tunnel with a minimum retransmission time of 20 ms, a VLAN ID of 100, and an L2
CoS priority setting of 7:
To create an FCIP tunnel with FastWrite and read/write Tape Pipelining enabled:
To enable FCIP FastWrite and read/write Tape Pipelining on an existing tunnel:
To create an FCIP tunnel with Byte Streaming enabled:
To disable Byte Streaming on an existing tunnel:
To configure an FCIP Tunnel 1 with FICON XRC and FICON write Tape Pipelining emulation features
enabled using all default parameter arguments:
SEE ALSO
portCfgShow, portCmd, portShow, switchShow,
Fabric OS Command Reference
53-1001764-01
switch:admin> portcfg fciptunnel ge1 qosmap 1 3 -Q 29
switch:admin> portcfg fciptunnel ge1 qosmap 1 3 -Q 28 -P 7
switch:admin> portcfg fciptunnel ge1 qosmap 1 3 -P 2
switch:admin> portcfg fciptunnel ge1 qosmap 1 -default
switch:admin> portcfg fciptunnel 8/ge0 create
1 192.168.10.1 192.168.20.1 0 -m 20
-v 100 -p 3 -P 7
Operation Succeeded
switch:admin> portcfg fciptunnel 3/ge0 create 6
10.1.1.44 192.168.131.124 155000 -f -t
switch:admin> portcfg fciptunnel ge1 modify 0 -f 1
switch:admin> portcfg fciptunnel geo create 1 \
172.68.100.88 192.168.200.108 0 -f1 -bstr
switch:admin> portcfg fciptunnel ge0 modify 1-bstr 0
switch:admin> portcfg ficon ge0 1 -x 1 -w 1
\
\
\
configure
22
portCfg
627