Brocade Communications Systems Brocade 8/12c Command Reference Manual page 1054

22
topologyShow
Total Bandwidth
Bandwidth Demand
Flags
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
The following operand is optional:
domain
EXAMPLES
To display the topology on a single switch: domain is local, details are not displayed.
When executed from an edge fabric, topologyshow displays details for all domains, including local
domains and local translate domains:
1020
The maximum bandwidth of the out port. A bandwidth that is less than 0.512 Gbps
is adjusted to the nearest power of 2 value. A bandwidth in the range of 0.512
Gbps (included) to 1 Gbps (not included) is adjusted to the 0.512 Gbps value. No
adjustment takes place if the bandwidth is greater or equal to 1 Gbps.
The maximum bandwidth demand by the in ports.
Always D, indicating a dynamic path. A dynamic path is discovered automatically
by the FSPF path selection protocol.
Specify the destination domain for which to display the topology information.
switch:user> topologyshow
1 domains in the fabric; Local Domain ID: 97
switch:user> topologyshow
6 domains in the fabric; Local Domain ID: 7
Domain: 1
Metric: 10500
Name: fcr_xd_1_1
Path Count: 1
Hops:
Out Port:
In Ports:
Total Bandwidth:
Bandwidth Demand:
Flags:
Domain: 2
Metric: 1000
Name: fcr_fd_2
Path Count: 1
Hops:
Out Port:
In Ports:
Total Bandwidth:
Bandwidth Demand:
Flags:
Domain: 3
Metric: 10500
2
11
0 1 2 3 4 5 6 7 8 9 15
8.000 Gbps
1275 %
D
2
15
0 1 2 3 4 5 6 7 8 9 11
2.000 Gbps
4000 %
D
Fabric OS Command Reference
53-1001764-01