Thmonitor - Brocade Communications Systems Brocade 8/12c Command Reference Manual

thMonitor

Enables monitoring of small form-factor pluggables (SFPs).
SYNOPSIS
thmonitor --enable brcdsfp
thmonitor --disable brcdsfp
thmonitor --show
DESCRIPTION
Use this command to enable Fabric Watch threshold monitoring for 10G and 16G SFPs and for 16G
QSFPs. Fabric Watch does not monitor 10G and 16G SFPs or 16G QSFPs unless monitoring is explicitly
enabled with this command.
NOTES
This command requires a Fabric Watch license.
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
This command has the following operands:
--enable brcdsfp
--disable brcdsfp
--show
--help
EXAMPLES
To enable Fabric Watch threshold monitoring for 10G and 16G SFPs and for 16G QSFPs.
To display the configuration:
To disable Fabric Watch threshold monitoring for 10G and 16G FPs and for 16G QSFPs.
SEE ALSO
thConfig,
Fabric OS Command Reference
53-1001764-01
Enables Fabric Watch threshold monitoring for 10G and 16G SFPs and for 16G
QSFPs. The feature is by default disabled.
Disables Fabric Watch threshold monitoring for 10G and 16G SFPs and for 16G
QSFPs.
Displays the current configuration.
Displays the command usage.
switch:admin> thmonitor --enable brcdsfp
Brcd SFP Threshold Monitoring is enabled
switch:admin> thmonitor --show
Brcd SFP Threshold Monitoring is enabled
switch:admin> thmonitor --disable brcdsfp
Brcd SFP Threshold Monitoring is disabled
sfpShow
22
thMonitor
1017