Brocade Communications Systems Brocade 8/12c Command Reference Manual page 541

To make logical switch FID 1 the base switch without confirmation:
To make logical switch FID 1 the base switch with confirmation:
SEE ALSO
lfCfg,
Fabric OS Command Reference
53-1001764-01
switch:admin> lscfg --change 1 -base -force
Disabling the current base switch...
Disabling switch fid 1
Disabling the proposed new base switch...
Disabling switch fid 1
Please enable your switches when ready.
switch:admin> lscfg --change 1 -base
Creation of a base switch requires that the proposed new base switch on this
system be disabled.
Would you like to continue [y/n]?: y
Disabling the proposed new base switch...
Disabling switch fid 1
Please enable your switches when ready.
setContext
22
lsCfg
507