Brocade Communications Systems Brocade 8/12c Command Reference Manual page 1057

-R
-c
-s slot
EXAMPLES
To initiate a background trace dump from slot 5:
To clear the status of a trace dump:
To clear the content of the trace dump buffer:
SEE ALSO
supportFtp, supportSave,
Fabric OS Command Reference
53-1001764-01
Clears the status of a particular trace dump on all slots.
Clears all trace dump buffers. This operation resets the trace buffer contents.
Specifies the slot number from which a trace dump is generated. If a slot is not
supplied, the trace dump is generated from the local slot. This operand is optional.
switch:admin> tracedump -n -s 5
switch:admin> tracedump -R
trace dump removed
switch:admin> tracedump -c
Cleared Trace Buffer contents
supportShow
22
traceDump
1023