Brocade Communications Systems Brocade 8/12c Command Reference Manual page 233

--reclaimWWN
•
•
•
•
EXAMPLES
1.
Fabric OS Command Reference
53-1001764-01
LUN_Num
Specifies the number of the LUN whose metadata needs to be reread.
initiator_PWWN
Specifies the initiator port WWN for the specified LUN.
Reclaims the WWNs of the specified member node or encryption engine. This
command removes the WWNs from the specified entity. Once removed you can
reallocate the WWNs. The reclaim operation is disruptive and prompts for
confirmation.
The following restrictions apply when you reallocate a WWN:
The reclaim operations must be executed on the group leader node. All encryption engines must be
online and the Group status must be "converged".
All nodes in the encryption group must run Fabric OS v7.0.0 or later.
You must commit all container changes prior to and following the reclaim operation.
You must perform a reclaim operation for any node or encryption engine that needs to be moved out
of an existing encryption group.
-membernode node_WWN
Specifies the node WWN of any member node in the encryption group. This
command frees up all WWNs associated with all encryption engines in the
specified member node. It also displays a list of containers that will be affected by
the reclaim operation.
--EE node_WWN slot
Specifies the node WWN of any encryption engine in the encryption group. This
command frees up all WWNs associated with the specified encryption engines for
reallocation. You must specify a slot number in addition to the EE node WWN. To
complete the reclaiming of an EE, you must remove the EE from the chassis after
the reclaim operation and commit the transaction.
-list
Displays a listing of crypto-target containers affected by the reclaim operation.
This operand is optional.
-cleanup
Removes all crypto configurations present on the member node after the WWNs
have been reclaimed. This command must be executed on the ejected member
node.
Create a zone that includes initiator and target.
a. Determine the device configuration.
FabricAdmin:switch> nsshow
{
Type Pid COS PortName
N 010600;2,3;10:00:00:00:c9:2b:c9:3a;20:00:00:00:c9:2b:c9:3a;na
NodeSymb: [35] "Emulex LP9002 FV3.82A1 DV5-4.81A4 "
Fabric Port Name: 20:06:00:05:1e:41:9a:7e
Permanent Port Name: 10:00:00:00:c9:2b:c9:3a
Port Index: 6
Share Area: No
Device Shared in Other AD: No
Redirect: No
Partial: No
The Local Name Server has 1 entry }
FabricAdmin:switch> nscamshow
NodeName TTL(sec)
22
cryptoCfg
199