Brocade Communications Systems Brocade 8/12c Command Reference Manual page 191

--export
--import
Fabric OS Command Reference
53-1001764-01
Exports a certificate from the local encryption switch or blade to a specified
external host or to a mounted USB device. This command is valid on all nodes.
The files are exported from the predetermined directory that was generated during
the node initialization phase. The following operands are supported with the
--export command:
-scp
Exports a specified certificate to an external host using the secure copy (SCP)
protocol.
When -scp is specified, the following operands are required:
host IP| host_name
Specifies the IP address of the host to which the file is to be exported. To
specify the host by name, it must first be configured with the dnsConfig
command.
host_username
Specifies the user name for the host. Depending on your host configuration,
the command may prompt for a password.
host_file_path
Specifies the fully qualified path to the file on the host to which the file is to be
exported. This includes the file name. Make sure to name your certificates so
you can track the file type and the originator switch, for example,
name_cpcert.pem.
-usb
Exports a specified certificate to a mounted USB storage device. When -usb is
specified, the following operands are required:
dest_filename
Specifies the name of the file on the USB device to which the file is to be
exported. The file is stored in a predetermined default directory on the
storage device.
Specify one of the following certificates to be exported. Certificates must be
specified by file type. Referring to certificates by file name is not permitted. These
file types are valid both with the -scp and with the -usb options.
-dhchallenge vault_IP_address
Exports the DH Challenge file for the specified key vault.
-currentMK
Exports the current master key file.
-KACcert
Exports the KAC certificate.
-KACcsr
Exports the certificate sign request file. Use the cryptocfg --reg -KACcert
command to register the certificate on the node after it has been signed and
reimported. This procedure must be performed for allnodes that participate in
a two-way certificate exchange-based authentication mechanism with key
vaults. Two-way certificate exchange is supported only for the RKM, HP
SKM, and NCKA key vaults.
-CPcert
Exports the member node CP certificate.
Imports a certificate from a specified external host or from a mounted USB
storage device to a predetermined directory on the local encryption switch or
blade. This command is valid on all nodes.
22
cryptoCfg
157