Brocade Communications Systems Brocade 8/12c Command Reference Manual page 686

22
portCfgFec
--help
EXAMPLES
To enable the FEC feature on a single port and to display the configuration:
To enable the FEC feature on a port, on which this feature is already enabled:
To enable the FEC feature on a port range:
To enable the FEC feature on a range of ports, some of which were previously enabled (the following
example enables port 4):
To disable the FEC feature on a port range:
SEE ALSO
portCfgShow,
652
Forward Error Correction configured
Displays ON if FEC is enabled on the port. Displays OFF if the feature is disabled
(default).
Displays the command usage.
switch:admin> portcfgfec --enable 1
switch:admin> portcfgfec --show 1
Forward Error Correction capable:
Forward Error Correction configured:
switch:admin> portcfgfec --enable 18
Same configuration for port 8
switch:admin> portcfgfec --enable 0-8
switch:admin> portcfgfec --enable 2-4
Same configuration for port 2
Same configuration for port 3
switch:admin> portcfgfec --enable 0-8
portEnable
ON
ON
Fabric OS Command Reference
53-1001764-01