Nsshow - Brocade Communications Systems Brocade 8/12c Command Reference Manual

22

nsShow

nsShow
Displays local Name Server (NS) information.
SYNOPSIS
nsshow [-r][-t]
DESCRIPTION
Use this command to display local NS information about devices connected to a switch. If no information
is available for the switch, the command displays the following message: "There is no entry in the Local
Name Server."
Use nsAllShow to display NS information for all switches in the fabric.
Each line of output displays the following information:
Type
PID
COS
PortName
NodeName
TTL
SCR
Device type
Fabric Port Name
Permanent Port Name
Port Index
Share Area
Device Shared in Other AD
Redirect
538
Displays U for unknown, N for N_Port, NL for NL_Port.
Displays the 24-bit Fibre Channel address of the device.
Displays the Class of Service levels supported by the device. This can be class 1,
class 2, or class 3. The command displays only the numeric values, 1, 2, and/or 3.
A device can support multiple CoS levels.
Displays the device port world wide name (WWN).
Displays the device node WWN.
Displays the time-to-live, in seconds, for cached entries or NA (not applicable) if
the entry is local.
Displays the state change registration of the device. This field displays only with
the -r option.
Displays the device type if -t is specified.
Displays the F_Port WWN to which the N_Port connects.
Displays the physical N_Port or NL_Port WWN.
Displays the index number of the physical N_Port to which the device connects.
Displays "Yes" if the port shares an area; otherwise displays "No".
Displays "Yes" if the device is shared in another Admin Domain; otherwise
displays "No."
Displays "Yes" if the device is involved in frame redirection; otherwise displays
"No". The device involved in frame redirection is specified as either "virtual" ,
"host", or "target".
Fabric OS Command Reference
53-1001764-01