Brocade Communications Systems Brocade 8/12c Command Reference Manual page 216

22
cryptoCfg
cryptocfg --resume_rekey crypto_target_container_name
LUN_Num initiator_PWWN
cryptocfg --discoverLUN crypto_target_container_name
cryptocfg --show -container -all -cfg | -stat
cryptocfg --show -container crypto_target_container_name
-cfg | -stat
cryptocfg --show -tapepool -all | -label pool_label |
-num pool_num -cfg | -stat
cryptocfg --show -LUN crypto_target_container_name
LUN_Num initiator_PWWN -cfg | -stat
cryptocfg --show -rekey -all
cryptocfg --show -rekey crypto_target_container_name
cryptocfg --show -rekey crypto_target_container_name
LUN_Num initiator_PWWN
cryptocfg --show -tape_sessions -all
cryptocfg --show -tape_sessions crypto_target_container_name
cryptocfg --clearstats -container
[-all | crypto_target_container_name ]
cryptocfg --clearstats -LUN crypto_target_container_name
LUN_Num initiator_PWWN
cryptocfg --refreshDEK crypto_target_container_name
LUN_Num initiator_PWWN
cryptocfg --reclaimWWN -membernode node_WWN [-list]
cryptocfg --reclaimWWN -EE node_WWN slot[-list]
cryptocfg --reclaimWWN -cleanup
DESCRIPTION
Use these cryptoCfg commands to configure and manage tape or disk devices that store the encrypted
and compressed data.
A CryptoTarget container (CTC) is a configuration of "virtual devices" that is created for each target port
hosted on a Brocade Encryption Switch or FS8-18 blade. The container holds the configuration
information for a single target, including associated hosts and LUN settings. A CryptoTarget container
interfaces between the encryption engine, the external storage devices (targets), and the initiators
(hosts) that can access the storage devices through the target ports.
Virtual devices redirect the traffic between host and target/LUN to encryption engines so they can
perform cryptographic operations. To enable frame redirection, you must create a target-initiator zone
prior to performing any CryptoTarget container configuration.
The CryptoTarget container (CTC) and associated Crypto LUN configuration is always configured from
the group leader node, and the configuration is subsequentlyn propagated to all members in the
encryption group.
182 Fabric OS Command Reference
53-1001764-01