Lsdbshow - Brocade Communications Systems Brocade 8/12c Command Reference Manual

22

lsDbShow

lsDbShow
Displays the Fabric Shortest Path First (FSPF) link state database.
SYNOPSIS
lsdbshow [domain]
DESCRIPTION
Use this command to display an FSPF link state database record for switches in the fabric or for a
specified domain.
There are two types of database entries:
•
•
The LSR describes the links between connected domains in a fabric. For a link to be reported in the LSR,
the neighbor for that link must be in NB_ST_FULL state.
This command displays the content of both types of database entries, if both are present, as shown
below:
Domain
lsrP
earlyAccLSRs
ignoredLSRs
lastIgnored
installTime
lseFlags
uOutIfs
uPathCost
uOldHopCount
uHopsFromRoot
mOutIfs
parent
mPathCost
mHopsFromRoot
508
The link state database entry, which is permanently allocated.
The link state record (LSR), which is allocated when a switch is connected to the fabric.
Domain ID described by this LSR. A (self) keyword after the domain ID indicates
that LSR describes the local switch.
Pointer to LSR.
Number of LSRs accepted, even though they were not sufficiently spaced apart.
Number of LSRs not accepted because they were not sufficiently spaced apart.
Last time an LSR was ignored.
Time this LSR was installed in the database, in seconds since boot.
Internal variable.
Internal variable.
Internal variable.
Internal variable.
Internal variable.
Internal variable.
Internal variable.
Internal variable.
Internal variable.
Fabric OS Command Reference
53-1001764-01