Portswapshow - Brocade Communications Systems Brocade 8/12c Command Reference Manual

portSwapShow

Displays the state of the PortSwap feature.
SYNOPSIS
portswapshow
DESCRIPTION
Use this command to display the state of the PortSwap feature and information about swapped ports. If
portSwap is enabled and ports have been swapped, the command displays the enabled status as well
as the swapped ports and the new port address (the 24-bit PID) for these ports. If portSwap is disabled,
the command shows the disabled status and indicates whether or not swapped ports exist on the switch.
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
None
EXAMPLES
To display a switch with PortSwap enabled and information for swapped ports:
To display the portSwap status on a switch when the feature is disabled and no ports are swapped:
SEE ALSO
portSwap, portDisable, portEnable, portShow, portSwap, portSwapDisable, portSwapEnable,
switchShow
Fabric OS Command Reference
53-1001764-01
Console message:
2009/10/09-21:22:45, [PSWP-1001], 482, SLOT 6 | FID 51, INFO,
DCX_105_51, PID for port 12/0 and port 12/63 are swapped.
New PID for port 12/0 is 0x697000 and port 12/63 is 0x69e3c0.
switch:admin> portswapshow
PortSwap is enabled
Slot Slotport
============================================
12 0
12 63
switch:admin> portswapshow
PortSwap is disabled.
Existing Portswap condition is still effective.
Only future Portswap operations are not allowed.
No ports have been swapped
Swport Address
112 0x697000
895 0x69e3c0
22
portSwapShow
833