Historymode - Brocade Communications Systems Brocade 8/12c Command Reference Manual

22

historyMode

historyMode
Displays the mode of the field replaceable unit (FRU) history log.
SYNOPSIS
historymode
DESCRIPTION
Use this command to display the mode of the history buffer, which records the insertion and removal of
FRUs on a switch or chassis.
This command supports two modes of handling new log entries once the history buffer has reached its
maximum size:
Rotating mode
First-in mode
The history mode is a factory setting that cannot be modified. The size of the history buffer depends on
the hardware platform. The Brocade DCX backbone supports a maximum log size of 50 entries. Because
the WWNs are completely separate FRUs in the DCX, they have redundant data in these units. All other
platforms containing FRUs support 28 history log entries.
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
None
EXAMPLES
To display the mode of the history log:
SEE ALSO
historyLastShow,
420
Any new entry exceeding the maximum buffer size overwrites the oldest entry in
the log. This is the default mode.
Any new entry exceeding the maximum buffer size is discarded. The original
entries in the buffer is preserved.
switch:admin> historymode
History Mode is: Rotating.
historyShow
Fabric OS Command Reference
53-1001764-01