Supportshowcfgenable - Brocade Communications Systems Brocade 8/12c Command Reference Manual

22

supportShowCfgEnable

supportShowCfgEnable
Enables a group of commands to be displayed under the supportShow command.
SYNOPSIS
supportshowcfgenable os | exception | port | fabric
| services | security | network | portlog | system
| extend | filter | perfmon | ficon | iswitch | asic_db
| ag | dce_hsl |crypto | fcip
DESCRIPTION
Use this command to enable a group of commands to be displayed under the supportShow command.
Use the supportShowCfgDisable command to disable groups of commands.
The FCIP commands are supported only on the Brocade 7800/FX8-24 and FR4-18i platforms and
cannot be configured to collect data on unsupported platforms.
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
This command has the following operands:
os
exception
port
fabric
services
security
network
portlog
system
extend
filter
perfmon
ficon
iswitch
962
Enables the OS group commands.
Enables the exception group commands.
Enables the port group commands.
Enables the fabric group commands.
Enables the service group commands.
Enables the security group commands.
Enables the network group commands.
Enables the portlog group commands.
Enables the system group commands.
Enables the extend group commands.
Enables the filter group commands.
Enables the Performance Monitor group commands.
Enables the FICON group commands.
Enables the FC Router group commands.
Fabric OS Command Reference
53-1001764-01