Brocade Communications Systems Brocade 8/12c Command Reference Manual page 900

22
secAuthSecret
To delete the entire secret key database:
SEE ALSO
None
866
authentication. If switch is configured to do DH-CHAP,
it is performed whenever a port or a switch is enabled.
Warning: Please use a secure channel for setting secrets.
Using an insecure channel is not safe and may compromise
secrets.
Following inputs should be specified for each entry.
1. WWN for which secret is being set up.
2. Peer secret: The secret of the peer that
authenticates to peer.
3. Local secret: The local secret that authenticates peer.
Press Enter to start setting up shared secrets >
Enter WWN, Domain, or switch name (Leave blank when done):
10:00:00:60:69:80:05:14
Enter peer secret:
Re-enter peer secret:
Enter local secret:
Re-enter local secret:
Enter WWN, Domain, or switch name (Leave blank when done):
Are you done? (yes, y, no, n): [no] y
Saving data to key store... Done.
switch:admin> secAuthSecret --remove --all
This command deletes database of DH-CHAP secret keys.
If a fabric requires authentication, deleting this
database may cause switch to segment from the fabric.
Do want to remove secret key database?
(yes, y, no, n): [no] y
Deleting secret key database... Done.
Fabric OS Command Reference
53-1001764-01