Brocade Communications Systems Brocade 8/12c Command Reference Manual page 242

22
cryptoCfg
•
•
•
OPERANDS
This command has the following operands:
--help -decommission
--decommission
--delete -decommissionedkeyids
--show -decommissionedkeyids
--show -vendorspecifickeyid key_ID
EXAMPLES
The following steps must be performed to decommission a disk LUN:
1.
208
Device decommissioning is supported only with the LKM and RKM key vaults.
Decommissioning of tape devices or snap drive volumes is currently no supported.
Decommissioning does not automatically delete the keys. You must manually delete the keys from
the key vault to complete the operation.
Displays the command usage help for the device decommissioning commands.
Decommissions a disk LUN hosted in a specified container as seen from the
initiator. You must issue this command from the node that hosts the container.
Upon successful completion of a decommissioning operation, the LUN is deleted
from all the containers hosting it. All active paths to the LUN are lost; there is no
need to execute a decommissioning operation separately for each path
associated with the LUN. A commit operation is not required. The following
operands are required:
-container container_name
Specifies the name of the container that hosts the LUN.
-initiator initiatator_PWWN
Specifies the initiator port WWN.
-LUN LUN_num
Specifies the number of the LUN to be decommissioned.
Purges all key IDs associated with decommissioned LUNs from the internal
cache. You must delete the keys manually from the key vaults before purging the
cache.
Displays the key IDs associated with decommissioned LUNs.
Displays the UUID for the specified key. This operand is valid only on the RKM
key vault.
Execute the decommission operation on a LUN
switch:admin> cryptocfg --decommission -container disk_ct0 \
-initiator 21:01:00:1b:32:29:5d:1c -LUN 0
Operation succeeded.
Fabric OS Command Reference
53-1001764-01