Brocade Communications Systems Brocade 8/12c Command Reference Manual page 467

helloTo
rXmitTo
nCmdAcc
nInvCmd
nHloIn
nInvHlo
nLsuIn
nLsaIn
attHloOut
nHloOut
attLsuOut
nLsuOut
attLsaOut
nLsaOut
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
This command has the following operands:
slot
port
Fabric OS Command Reference
53-1001764-01
Hello timeout value, in milliseconds. When this timeout expires, a Hello frame is
sent to the neighbor switch through this port.
Retransmission timeout value, in milliseconds. It is used to transmit topology
information to the neighbor switch. If no acknowledgement is received within this
value, the frame is retransmitted.
Total number of commands accepted from the neighbor switch. Number includes
Hellos, Link State Updates (LSUs), and LSAs.
Number of invalid commands received from the neighbor switch. Usually
commands with an FSPF version number higher than the one running on the local
switch.
Number of Hello frames received from the neighbor switch.
Number of invalid Hello frames (Hello frames with invalid parameters) received
from the neighbor switch.
Number of LSUs received from the neighbor switch.
Number of LSAs received from the neighbor switch.
Number of attempted transmissions of Hello frames to the neighbor switch.
Number of Hello frames transmitted to the neighbor switch.
Number of attempted transmissions of LSUs to the neighbor switch.
Number of LSUs transmitted to the neighbor switch.
Number of attempted transmissions of LSAs to the neighbor switch.
Number of LSAs transmitted to the neighbor switch.
For bladed systems only, specify the slot number of the port to be displayed,
followed by a slash (/).
Specify the number of the port to be displayed, relative to its slot for bladed
systems. Use switchShow for a list of valid ports. This operand is optional; if
omitted, the interface information for all ports is displayed.
22
interfaceShow
433