Brocade Communications Systems Brocade 8/12c Command Reference Manual page 458

22
i
C
PRI
NI
ADDR
SZ
WCHAN
TTY
TIME
CMD
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
This command has the following operand:
processID
EXAMPLES
To display information about process ID 433:
SEE ALSO
diagHelp,
424
Processor utilization for scheduling
Priority number of the process; higher numbers mean lower priority
Nice value used in priority computation
Memory address of the process
The total size of the process in virtual memory, in pages
The address of an event for which a process is sleeping (if blank, process is
running)
The controlling terminal of the process (? displayed for no controlling terminal)
The cumulative execution time for the process
The command name of the process.
Specifies the process name or process ID for the process to display.
switch:admin> i 433
F S UID PID PPID C PRI NI ADDR
000 S 0 433 1 0
routeHelp
SZ WCHAN TTY
69 0 - 1283 5c64 ?
TIME CMD
00:00:02 fabricd
Fabric OS Command Reference
53-1001764-01