Brocade Communications Systems Brocade 8/12c Command Reference Manual page 741

-size pdu_size
-interval interval
EXAMPLES
To verify if packets can be sent to the destination IP address with maximum wait_time specified:
To trace the IP router hops used to reach the remote (with packet size specified):
To verify if packets can be sent to the destination IP address using VLAN tagging with the -c option.
To trace the IP router hops used to reach the remote host using VLAN tagging with the -c option.
To ping a failover crossport:
To trace the route to a failover crossport:
Fabric OS Command Reference
53-1001764-01
Specifies the PDU size to use (not including headers). The valid range is between
2048 and 10112 bytes. The default is equivalent to the maximum segment size
(MSS). This is the maximum size if the -random option is specified.
Specifies the interval at which the statistics display is refreshed, in seconds. The
default is 30 seconds.
switch:admin> portcmd --ping 12/ge0
-s 2007:7:30:32:227:138:10:120
-d 2007:7:30:32:227:77:0:60 -w 29000
Pinging 2007:7:30:32:227:77:0:60 from ip interface \
2007:7:30:32:227:138:10:120 on 12/ge0 with 64
bytes of data
Reply from 2007:7:30:32:227:77:0:60: bytes=64 rtt=0ms ttl=255
Reply from 2007:7:30:32:227:77:0:60: bytes=64 rtt=1ms ttl=255
Reply from 2007:7:30:32:227:77:0:60: bytes=64 rtt=0ms ttl=255
Reply from 2007:7:30:32:227:77:0:60: bytes=64 rtt=0ms ttl=255
Ping Statistics for 2007:7:30:32:227:77:0:60:
Packets: Sent = 4, Received = 4, Loss = 0 ( 0 percent loss)
Min RTT = 0ms, Max RTT = 1ms Average = 0ms
switch:admin> portcmd --traceroute 12/ge0
-s 2007:7:30:32:227:138:10:120
-d 2007:7:30:32:227:77:0:60 -z 1452
Traceroute to 2007:7:30:32:227:77:0:60 from IP interface
2007:7:30:32:227:138:10:120 on 12/0, 30
hops max
1 1 ms 0 ms 0 ms
Traceroute complete.
switch:admin> portcmd --ping 8/ge0
-s 192.168.10.1 -d 192.168.20.1 -v 10 -c 3
switch:admin> portcmd --traceroute 8/ge0
-s 192.168.10.1 -d 192.168.20.1 -v 10
switch:admin> portcmd --ping 8/xge0
192.168.11.20 -d 1.1.1.1 -x
switch:admin> portcmd --traceroute 8/xge0
192.168.11.20 -d 1.1.1.1 -x
\
\
\
\
\
\
\
\
22
portCmd
707